Enabling [Shortcut] ([Register]) Key; Customizing Basic Functions Screen - Kyocera KM-8030 Advanced Operation Manual
Kyocera km-8030: user guide
Hide thumbs
Also See for KM-8030:
- Operation manual (176 pages) ,
- Service manual (463 pages) ,
- Command reference manual (410 pages)
Table of Contents
Advertisement
System Settings
Enabling [Shortcut] ([Register]) Key
Enables the [Shortcut] ([Register]) keys so that it is displayed while various operations are made on
the touch panel. You can assign up to three frequently used functions listed on the [Function],
[Basic] and [User choice] screens to the preset keys.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [ ] or [ ] to select Display
register key (Display"Register"key) and
press [Change #].
3
Select [On] to let the [Shortcut]
([Register]) key enabled or [Off] to let the
[Shortcut] ([Register]) key disabled while
operating the touch panel.
4
Press [Close]. The touch panel will return to the Copy Default screen.
Customizing Basic Functions Screen
Allows you to customize the layout of the Basic Functions screen to your preference.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [ ] or [ ] to select Customize
(Basic Screen) (Customize (Main
function)) and press [Change #].
3
Highlight the menu item that you want to
change the order of appearance using
[ ] or [ ]. Press [Move Ahead] or
[Move Behind] ([Move Backward]) to
move the item back and forth in the
order according to the corresponding
number.
4
Press [Close]. The touch panel will return to the Copy Default screen.
3-18
System Menu / Counter
Copy Default
Default menu
Default erase width
Border
Preset limit
Repeat Copy
On / Default Off
Job Queue Report
On(All job)
Display register key
On
System Menu
Display register key
Select One touch key On/Off.
Able to use Register key on each screen.
Off
On
System Menu
-
Copy Default
System Menu / Counter
Copy Default
Default menu
Preset limit
Repeat Copy
On / Default Off
Job Queue Report
On(All job)
Display register key
On
Customize(Basic Screen)
System Menu
Customize(Basic Screen)
Basic
User choice
System Menu
-
Copy Default
Setting mode
¼ "
½ "
Center
Set
Change #
Back
Setting mode
Set
Change #
Back
Register Mode
Reduce/Enlarge
Move
Ahead
Exposure Mode
Staple
Move
1/2 sided
Behind
Orig. Quality
Sort/Offset
Advertisement
Table of Contents
