Kyocera KM-C2630D Operation Manual page 217

Default drawer[cassette]
Perform the following procedure to set one drawer[cassette] that
will be selected automatically regardless of the size of paper loaded
in that drawer[cassette]. It is NOT possible to select the
multi-bypass tray as the default drawer[cassette].
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Default drawer[cassette]" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Default drawer[cassette]" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Eco Print Off
Select paper APS
Pap. Type(Auto col. pap.) On
Paper Type(Auto BW Paper) On
Default drawer 2nd paper
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Eco Print Off
Select paper APS
Pap. Type(Auto col. pap.) On
Paper Type(Auto B&W pap.) On
Default cassette 2nd paper
Default setting
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Setting mode
Up
Down
Change #
Setting mode
Up
Down
Change #
Section 7 COPIER MANAGEMENT
3
Press the key that corresponds to the desired
drawer[cassette].
Inch specifications
Default drawer
Select priority drawer.
Default setting - Copy default
Metric specifications
End
Default cassette
Select paper cassette for default setting.
Default setting - Copy default
End
NOTES
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
• The setting for drawer[cassette] No.1 will not be
available on duplex copiers because the Duplex Unit is
installed in its place.
• The setting for drawer[cassette] No.2 through No.4 will
only be available when the optional Paper Feeder is
installed on your copier.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
Close
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Back
1st paper
2nd paper
3rd paper
4th paper
Back
1st paper
2nd paper
3rd paper
4th paper
Close
Close
7-79