Extra Heavy; Custom Paper Type For 2-Sided Copying - Kyocera KM-C2630D Operation Manual

4
Select a paper weight.
Inch specifications
Plain
Light
(Thin)
Normal1
Normal2
Normal3
Default setting - Machine default - Paper type (paper weight)
Metric specifications
Plain
Light
(Thin)
Normal1
Normal2
Normal3
Default setting - Machine default - Paper type (paper weight)
NOTES
• The keys that appear for selection depend on the paper
type.
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 3.
• If you want to use the same paper type and select a
different paper weight, configure the setting of one of
the paper types named Custom 1 through Custom 8.
5
Press the "Close" key.
The touch panel will return to the screen in step 3.
6
Press the "Close" key.
The touch panel will return to the screen in step 2.
7
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
8
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Back
Heavy1
Heavy2
Heavy3
Extra
Heavy
Back
Heavy1
Heavy2
Heavy3
Extra
Heavy
Section 7 COPIER MANAGEMENT

Custom paper type for 2-sided copying

Perform the following procedure to set whether or not each custom
type of paper (custom 1 – custom 8) will be available for use in
Close
2-sided copying.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
Close
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Select paper type (2sided)" under the "Default
menu" column on the left side of the touch panel and then
press the "Change #" key.
The "Select paper type (2sided)" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
Select Copy output mode
Default setting
Metric specifications
Default setting/ Counter
Machine default
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
Select COPY output mode
Default setting
Language
Bypass
setting
Register
orig. size
Language
Bypass
setting
Register
orig. size
Default menu Setting mode
60 Minute
15 Minute
Top tray
Default menu Setting mode
60 Minute
15 Minute
Top tray
End
Management
Counter
check
User
Print
Adjustment
report
End
Management
Counter
check
User
Print
Adjustment
report
Close
Up
Down
Change #
Close
Up
Down
Change #
7-51