Accessing The Copy Default Settings - Kyocera KM-C2630D Operation Manual

Accessing the copy default settings

Perform the following procedure when you want to access the
screens for each of the various copy default settings.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "Copy default" key on the left side of the touch
panel.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
Language Management
Counter
Bypass
setting check
User
Register Print
Adjustment
orig. size report
Language Management
Counter
Bypass
setting check
User
Register Print
Adjustment
orig. size report
Section 7 COPIER MANAGEMENT
3
Use the keypad to enter the 4-digit management code.
The factory default setting is "2600".
Inch specifications
Enter the administrator number.
Metric specifications
Enter the administrator number.
4
If the entered code matches the registered one, the "Copy
default" screen will be displayed.
Inch specifications
End
Default setting / Counter
Copy default
Exposure mode
Exposure steps
Original image quality
Auto Color/Full-Color/B&W
Auto Color Correction
Default setting
Metric specifications
End
Default setting/ Counter
Copy default
Exposure mode
Exposure steps
Image quality original
Auto colour/full col./B&W
Auto colour Correction
Default setting
NOTES
• It is possible for you to change the 4-digit management
code. (See "Changing the management code" on
page 7-60.)
• Refer to the desired procedure(s) explained under
"Making copy default settings" and perform the
corresponding setting(s).
Default menu Setting mode
Manual
1 step
Text+Photo
Full-Color
3
Default menu Setting mode
Manual
1 step
Text+Photo
Full-Colour
3
Close
Close
Close
Up
Down
Change #
Close
Up
Down
Change #
7-69