Selecting The Location Of Copy Ejection - Kyocera KM-C2630D Operation Manual

Section 6 OTHER CONVENIENT FUNCTIONS
Selecting the print page numbers mode
This procedure selects the print page numbers mode in order to
have page numbers printed on the corresponding copies.
1
Press the "Edit" key. Then, in the resulting screen, press
the "Page #" ["Page numbering"] key.
The "Page #" ["Page numbering"] screen will be displayed.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Job Build - Step 1
Off Auto
Border Select
Erase orig. size
None None
Margin/
Page #
Centering
Basic Quality
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Job Build - Step 1
Off Auto
Erase Select
mode size orig.
None None
Margin/ Page
Imag. shift numbering
Basic Quality
NOTE
The setting in regard to the print page numbers mode can
only be made in the first step of the job build mode and
will apply to all steps in the copy job.
2
For more detailed information on this setting, refer to the
explanation for the print page numbers mode on page 6-23.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Page #
None P.1
-1- 1/n
Metric specifications
eady to Job build.(Full Col.)
Set original. Press Start key.
Page numbering
None P.1
-1- 1/n
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
6-84
Insert
Off
page
Modify
Copy
2 sided copy-Left
Top tray
Finished page #: 0
Select of
Output
Edit
Insert
Off
blank page
Modify
copy
2-sided Copy-Left
Top tray
Finished page #: 0
Select of
Output
Edit
Back
Page # can be added on bottom of copy.
Back
Page # can be added on bottom of copy.

Selecting the location of copy ejection

You can specify an optional Document Finisher for the copy eject
location of the copies.
1
Press the "Edit" key. Then, in the resulting screen, press
the "Select of Output" key.
The "Select of Output" screen will be displayed.
Inch specifications
set
Ready to Job build.(Full-color)
Place originals then press Start key.
End
Job Build - Step 1
Off
Border
Erase
None
Margin/
Centering
Basic
Metric specifications
set
Ready to Job build.(Full Col.)
Set original. Press Start key.
End
Job Build - Step 1
Off
Erase
mode
None
Margin/
Imag. shift
Basic
NOTE
The setting in regard to the location of copy ejection can
only be made in the first step of the job build mode and
will apply to all steps in the copy job.
set
Close
Set
Close
Auto Off
Select Modify
orig. size Copy
2 sided copy-Left
None Top tray
Finished page #: 0
Select of
Page #
Output
Quality Edit
Auto Off
Select Modify
size orig. copy
2-sided Copy-Left
None Top tray
Finished page #: 0
Page Select of
numbering Output
Quality Edit
set
End
Insert
page
set
End
Insert
blank page