Kyocera KM-C2630D Operation Manual page 175

Response to exceeded restriction
Perform the following procedure to determine whether further use
of the machine will be canceled or an error message will be
generated when a department ID-code has exceeded its set limit.
1
Select "Excess of limit Setting" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
The "Excess of limit Setting" screen will be displayed.
Inch specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting Unable to use
Def. Val. of coun. limit 999999
Total size 1 8
Total size 2 11"x17" No specif.
Total size 3 8
Default setting - Management - Management Def. setting
Metric specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting You cannot use
Def. Val. of coun. Limit 999999
Total size 1 A3 No specif.
Total size 2 A4 No specif.
Total size 3 B4 No specif.
Default setting - Management - Management Def. setting
Value
1
/ x11" No specif.
2
Change #
1 / x11" No specif.
2
Value
Change #
Section 7 COPIER MANAGEMENT
2
To cancel further use of the machine, press the "Is not
permitted" key. To have an error message generated, press
the "Only warning" key.
Inch specifications
Excess of limit Setting
Possible to set the method when limit exceeded
Default setting - Copy default -
Close
Metric specifications
Excess of limit Setting
Possible to set the method when limit exceeded
Default setting - Copy default -
Close
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Back
Is not
permitted
Only
warning
Management Def. setting
Back
Is not
permitted
Only
warning
Management Def. setting
Close
Close
7-37