Copy Mode - Kyocera KM-C2630D Operation Manual

3
Press the key that corresponds to the desired location.
Inch specifications
Select Copy output mode
Set the default copy output destination.
Top tray
TrayA
Tray1
Tray2
Default setting - Machine default
Metric specifications
Select COPY output mode
Set the default copy output destination.
Top tray
TrayA
Tray1
Tray2
Default setting - Machine default
NOTES
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
• When an optional Document Finisher is installed,
Select "Top Tray" and "Finisher tray." When the Multi
Job Tray is installed, you can select from among "Top
Tray," "Tray A," and "Tray 1" through "Tray 5."
• "Top tray" and "Left tray" options are available when
the optional Left Tray is installed.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Back
Tray3
Tray4
Tray5
Back
Tray3
Tray4
Tray5
Section 7 COPIER MANAGEMENT
Fax eject location
Sets the location for ejection of received faxes and for printed
reports.
Close
NOTE
This setting is displayed only when the optional
Document Finisher or Left Tray is installed.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Close
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Select FAX output mode" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Select FAX output mode" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Select FAX output mode
Select the main mode
Key sound ON/OFF
Date/Time
Time difference
Default setting
Metric specifications
Default setting/ Counter
Machine default
Select FAX output mode
Select main mode
Key sound ON/OFF
Date/Time
Time difference
Default setting
Language
Bypass
setting
Register
orig. size
Language
Bypass
setting
Register
orig. size
Default menu Setting mode
Top tray

Copy mode

On
03/09/03 14:00
GMT+09:00
Default menu Setting mode
Top tray
COPY mode
On
03/09/03 14:00
GMT+09:00
End
Management
Counter
check
User
Print
report Adjustment
End
Management
Counter
check
User
Print
report Adjustment
Close
Up
Down
Change #
Close
Up
Down
Change #
7-55