Kyocera KM-C2630D Operation Manual page 85

8
If you want to add covers, press the "Copy on front cvr"
["Copy on front cov."] key.
The "Copy on front cover" screen will be displayed.
At this point, if you do NOT want to copy onto the covers, go
directly to step 10.
Inch specifications
Set first page.
Press "Start" key.
Booklet
Original
Book
None
Left
Book
Booklet
Right
Book
Booklet
Metric specifications
Set first page.
Press "START" key.
Booklet
Original
Book
None
Left
Book
Booklet
Right
Book
Booklet
9
Press the "On" key.
Inch specifications
Set first page.
Press "Start" key.
Copy on front cover
Off When selecting "ON" for copying on the
front cover, follow the instruction.
1.Scan front cover book original.
On
2.Start scan book originals.
Metric specifications
Set first page.
Press "START" key.
Copy on front cover
Off When selecting "ON" for copying on the
front cover, follow the instruction.
1.Scan front cover book original.
On
2.Start scan book originals.
IMPORTANT!
If you DO want to copy onto the covers, be absolutely
certain to set the original that you want to have copied
onto the cover first.
Paper Size
11x8 /
1
2
Register Back
Finished Copy front Check direction
Set the book original
top side direct to rear.
None
Open from Copy on
left front cvr
Open from
None
right
Saddle
Stitch
Paper Size
Register Back
Finished Copy front Check direction
Set book original top
side direction to back.
None
Left Copy on
binding front cov.
Right
None
binding
Center
Staple
Paper Size
11x8 /
1
2
Back
Check direction
Set the book original
top side direct to rear.
Paper Size
Back
Check direction
Set book original top
side direction to back.
Section 6 OTHER CONVENIENT FUNCTIONS
10
Press the [Start] key.
Scanning of the originals will start.
When a message appears telling you to set the next
original, go to the next step.
Set
Close
11
Replace the first original with the next one and press the
Set
[Start] key.
Scanning of that next original will start.
Close
12
Once you have finished scanning all of the originals, press
the "Scanning finished" key.
Copying will start.
Set
Close
Set
Close
6-35