Kyocera KM-C2630D Operation Manual page 171

Non-standard printer driver printout (Printer)
Perform the following procedure when "On" is selected as the
"Printer function management ON/OFF" setting and you want
to want to allow the use of printer drivers other than those
available under copy management.
NOTE
This setting will only be available when "On" is selected
as the "Printer function management ON/OFF"
setting.
1
Select "Others Mgt. Reg. (print)" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
The "Others Mgt. Reg. (print)" screen will be displayed.
Inch specifications
Management Def. setting
Setting item
Copy management On
Print. Managem. On
Printer error report On
Others Mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Management On
Fax Management On
Default setting - Management
Metric specifications
Management Def. setting
Setting item
Copy management On
Print. managem. On
Printer error report On
Others mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Management On
Fax Management On
Default setting - Management
Close
Value
Change #
Close
Value
Change #
Section 7 COPIER MANAGEMENT
2
To allow the use of printer drivers other than those
available under copy management, press the "On" key.
Inch specifications
Others Mgt. Reg. (print)
Output of print. is possible for unspecif. ID-code.
Off
On
Default setting - Management - Management Def. setting
Metric specifications
Others mgt. Reg. (print)
Output of print. is possible for unspecif. ID-code.
Off
On
Default setting - Management - Management Def. setting
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Back Close
Back Close
7-33