Setting The Image Quality - Kyocera KM-C2630D Operation Manual

Section 6 OTHER CONVENIENT FUNCTIONS
Setting the scanning density
This procedure sets the copy exposure for the finished copies.
1
Press the "Quality" key. Then, in the resulting screen, press
the "Exposure mode" key.
The "Exposure mode" screen will be displayed.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Job Build - Step 1
Density 4 Text + Photo
Exposure Orig.image
mode quality
Off Off
Color
Adjust Hue
balance
Basic Quality
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Job Build - Step 1
Density 4 Text + Photo
Exposure Image
mode quality
Off Off
Colour
Adjust Hue
balance
Basic Quality
2
If you want to have the copy exposure selected
automatically, press the "Auto" key.
If you want to manually set the exposure, press the
"Manual" key and then press the "Lighter" key or the
"Darker" key to move the cursor on the exposure scale and
adjust the exposure as desired.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Exposure mode
Auto
Manual Lighter
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Exposure mode
Auto
Manual Lighter
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
6-78
Off Insert
page
Eco Print
GlossPrint
1 sided copy-Left
Off
Finished page #: 0
Sharp
-ness
Edit
Off Insert
blank page
Eco print
Glos. pri.
1-sided Copy-Left
Off
Finished page #: 0
Sharp
-ness
Edit
Back
Darker
Back
Darker

Setting the image quality

This procedure sets the image quality according to the type of
originals being copied.
1
Press the "Quality" key. Then, in the resulting screen, press
the "Orig. image quality" key.
The "Orig. image quality" screen will be displayed.
Inch specifications
set
Ready to Job build.(Full-color)
End
Place originals then press Start key.
Job Build - Step 1
Density 4
Exposure
mode
Off
Color
balance
Basic
Metric specifications
set
Ready to Job build.(Full Col.)
End
Set original. Press Start key.
Job Build - Step 1
Density 4
Exposure
mode
Off
Colour
balance
Basic
2
Select the image quality from among those available:
"Text+Photo", "Photo original", "Print original", "Text" and
"Map".
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Orig.image quality
set
Close
Text + Photo
Photo
original
Print
original
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Image quality orig.
set
Close
Text + Photo
Photo
original
Print
original
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Text + Photo Off
Orig.image Eco Print
quality GlossPrint
1 sided copy-Left
Off Off
Finished page #: 0
Sharp
Adjust Hue
-ness
Quality Edit
Text + Photo Off
Image Eco print
quality Glos. pri.
1-sided Copy-Left
Off Off
Finished page #: 0
Sharp
Adjust Hue
-ness
Quality Edit
Text
Text+Photo:Text+Photo original.
Photo: For photographic prints
Map
Print: For book and magazine images
Text: For text, pencil,or fine lines
Map: For maps or pencil illustration
Text
Text+Photo:Text+Photo original.
Photo:Adds dimensional effect to photo.
Map
Print:Adds dimensional effect to print.
Text :Clear copy of pencil & fine lines.
Map :Clear copy of fine lines.
set
End
Insert
page
set
End
Insert
blank page
set
Back Close
set
Back Close