Multi-Bypass Tray Settings Display On/Off - Kyocera KM-C2630D Operation Manual

Multi-bypass tray settings display ON/OFF

Perform the following procedure to have the "Bypass setting"
screen appear whenever the "Bypass" key is pressed in the "Basic"
tab.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Check bypass sizing" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Check bypass sizing" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (1st drawer)
Paper type (2nd drawer)
Paper type (3rd drawer)
Paper type (4th drawer)
Check bypass sizing
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu
Paper type (1st cassette)
Paper type (2nd cassette)
Paper type (3rd cassette)
Paper type (4th cassette)
Check bypass sizing
Default setting
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Setting mode
Up
Auto/Inch
Auto/Inch
Down
Auto/Inch
Auto/Inch
On/Off
Change #
Setting mode
Up
Auto/Centimeter
Auto/Centimeter
Down
Auto/Centimeter
Auto/Centimeter
On/Off Change #
Section 7 COPIER MANAGEMENT
3
Press the "On" key if you want to have the "Check bypass
setting" screen appear.
Inch specifications
Check bypass sizing
Display and check bypass setting mode when selecting.
Select "On" when using custom size or changing paper type.
Default setting - Machine default
End
Metric specifications
Check bypass sizing
Display and check bypass setting mode when selecting.
Select "On" when using custom size or changing paper type.
Default setting - Machine default
End
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Close
On
Off
On
Off
Back Close
Back Close
7-49