Kyocera KM-C2630D Operation Manual page 176

Section 7 COPIER MANAGEMENT
Default copy limit
Perform the following procedure when you want to change the
default copy limit for new department ID-codes.
1
Select "Def. Val. of coun. limit" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
The "Def. Val. of coun. limit" screen will be displayed.
Inch specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting Unable to use
Def. Val. of coun. limit 999999
Total size 1 8
Total size 2 11"x17" No specif.
Total size 3 8
Default setting - Management - Management Def. setting
Metric specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting You cannot use
Def. Val. of coun. Limit 999999
Total size 1 A3 No specif.
Total size 2 A4 No specif.
Total size 3 B4 No specif.
Default setting - Management - Management Def. setting
7-38
Value
1 / x11" No specif.
2
Change #
1
/ x11" No specif.
2
Value
Change #
2
Use the numeric keys on the keypad to enter the default
copy limit. The limit can be set to any 1-page increment up
to 999,999.
Inch specifications
Def. Val. of coun. limit
Default value of counter limit can be set.
Close
Default setting - Management -
Metric specifications
Def. Val. of coun. Limit
Default value of counter limit can be set.
Close
Default setting - Management -
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Back
(1~999,999)
Limited value
999,999
clear
Management Def. setting
Back
(1~999,999)
Limited value
999,999
clear
Management Def. setting
Close
Close