Connecting Wan And Lan Interfaces - Cisco IR8300 Installing And Connecting

Installing and Connecting the Router
Figure 6: RJ-45 to RJ-45 Rollover Cable
For the pinout descriptions for the DB-9 connections, see
Console Port Signaling and Cabling with a DB-25 Adapter
This section describes the console port signaling and cabling with a DB-25 adapter as shown in the following
figures.
Figure 7: RJ-45 to DB-25 Adapter (Terminal)
Figure 8: RJ-45 to DB-25 Female Adapter
For the pinout descriptions for the DB-25 connections, see

Connecting WAN and LAN Interfaces

This section describes how to connect WAN and LAN interface cables.
Warning
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1001
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Console Port Signaling and Cabling with a DB-25 Adapter
Console Port Adapter Pinouts.
Console Port Adapter Pinouts.
Installing and Connecting the Router
9