Serial Subinterface Management—Configuration Window
Serial Subinterface Management—Configuration Window
The Serial Subinterface Management—Configuration window describes a logical DS3 channel on a
channelized OC-12 (ChOC-12) or OC-48 (ChOC-48) SONET interface of an Optical Service Module
(OSM). A DS3 channel of a SONET interface is provisioned as a logical Serial interface. This window
can be launched from the OSM Channelized SONET Module or Interface object or the Serial
Subinterface object within the Physical view.
To launch the Serial Subinterface Management - Configuration window, perform one of the following:
•
•
The following figure is an example of the Serial Subinterface Management - Configuration window.
Figure 8-24 Serial Subinterface Management—Configuration Window
You can select multiple OSM serial subinterfaces, OSM Channelized SONET interfaces, OSMs, and
chassis at a time from the object list on the left side of the window.
Cisco Catalyst Switch Manager User Guide
8-94
Right–click a Network Element object within the Network or Physical containment views, then
choose CSM/7600 Manager > Physical > Subinterface > OSM Serial.
Right–click a Chassis object within the Network or Physical containment views, then choose
Physical > Subinterface > OSM Serial.
Chapter 8
Interface and Subinterface Management
OL-4930-01