The Storage Tab - Media Server; Figure 5-34: Storage Tab - Upnp Media Server; Figure 5-35: Partition List; Figure 5-36: Folder List - Cisco Linksys WRT350N Quick Installation Manual

Wireless-n gigabit router with storage link
Hide thumbs Also See for Linksys WRT350N:
Table of Contents

Advertisement

Wireless-N Gigabit Router with Storage Link

The Storage Tab - Media Server

The Router has a built-in UPnP AV media server, so it can stream music, pictures, or video from the USB hard disk
to a UPnP-compatible media adapter. The Media Server screen lets you select shares to scan for content.
UPnP Media Server
Setup
Server Name. The name of the Router is displayed here.
UPnP Media Server. To use the Router's media server function, select Enable. Otherwise, select Disable. (A USB
flash drive or USB hard disk must be connected to the USB port to use this feature.)
Database
Select content to add to the database of the Router's media server.
Scan All Partitions. Click this button to scan all partitions of the USB hard disk for content.
Select Partitions to Scan. Click this button to select specific partitions or folders to scan for content. The
Partition List screen will appear.
To select a partition for scanning, click the Select button. To update the on-screen information, click the
Refresh button. To exit the Partition List screen, click the Close button. To move down one level of the file
structure and select a specific folder, click the name of the partition. The Folder List screen will appear.
To select a folder for scanning, click the Select button. To move down one level of the file structure, click the
name of the folder. To move up one level of the file structure, click the Up One Level button. To update the on-
screen information, click the Refresh button. To exit the Folder List screen, click the Close button.
The Partition and Folder columns describe the partitions of the USB hard disk.
Scan. Click the Scan button to scan a specific partition or folder for content.
Delete. Click the Delete button to delete a specific partition or folder from the Router's media database.
After you have made your changes, click the Save Settings button to apply your changes, or click the Cancel
Changes button to cancel your changes.
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Storage Tab - Media Server

Figure 5-34: Storage Tab - UPnP Media Server

Figure 5-35: Partition List

Figure 5-36: Folder List

Figure 5-37: Select Partition/Folder To Scan

35

Advertisement

Table of Contents
loading

Table of Contents