Types Of Print Services; Setting Up A Netware Print Service - Canon imagePROGRAF W8400 User Manual

NetWare Settings (Windows)

Setting Up a NetWare Print Service

To print using a NetWare network, print services such as
print servers, queues, etc., need to be setup. The print
service settings can be made from the computer you are
using with the following software. Use the software that is
easiest for you.
NWADMIN or PCONSOLE (Novell software
applications provided with NetWare)
Important
If you configure the print service settings using
NWADMIN, Novell Client (the Novell NetWare client)
must be installed as the client software application.
This section describes an example of the configuration
procedure using NetWare print service. The
configuration procedure may change depending on the
environment you are using.

Types of Print Services

Before performing the print service settings, be sure to
read the description below then select the printer service
type.
Note
With NetWare 5.1J/6.0, NDPS can also be used as the
print service. If using NDPS, use the Novell printer
gateway, which is bundled with NetWare. This manual
does not explain how to setup NDPS, so refer to the
NetWare manual.
5- 37
NDS (Novell Directory Service) and Bindery
Both NDS and bindery are supported. Select
whichever mode is compatible with your network
environment.
Queue Server Mode and Remote Printer Mode
Both Queue Server Mode and Remote Printer Mode
are supported.
Queue Server Mode
If you are using queue server mode, all print server
functions are supported, so there is no need for
additional print server hardware or software. In NDS
queue server mode (NDS PServer), printing is
performed using the NDS print server. In bindery
queue server mode (Binery PServer), printing is
performed using the bindery print server.
Further, in queue server mode, a NetWare user license
is required for each network interface used.
Remote Printer Mode
If using remote printer mode, the printer is controlled
by the NetWare print server. Consequently, a NetWare
print server is required. In NDS remote printer mode
(NPrinter), printing is performed using the NDS print
server, and in bindery remote printer mode (RPrinter),
printing is performed using the bindery print server.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index