Canon imagePROGRAF W8400 User Manual page 117

Using the Media Take-up Unit
10
If you are using the output stacker, hold up
the stacker arm keeping the left and right
sides horizontal, and then press the arm
towards the back until the arm locks. Next,
mount the two front stacker rods on the front
of the rod holder and the backmost stacker
arm.
Important
Make sure to attach the stacker rods to the backmost
rod holder and front of the stacker arm. Attaching the
stacker rods to the second rod holder from the back
may cause the ejected paper to miss the output
stacker, causing the printed surface to become dirty.
Use the second rod holder from the back as a
temporary holder for the front of the stacker rod during
maintenance.
2- 56
Settings to Not Use the Media Take-up
Unit
1
Press the Online button to display MAIN
MENU on the printer display.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
2
Press [ ] or [ ] to select Take-up Reel,
and then press [ ].
MAIN MENU
↓
Take-up Reel
3
Press [ ] or [ ] to select Disable, and
then press the OK button.
Take-up Reel
Disable
(=) will be displayed to the left of the set value, and
the seeder will be set to Disable.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index