Setting Up A Netware ® Print Service; Types Of Print Services - Canon imagePROGRAF W7200 Network Manual

Setting Up a NetWare
Important

Types of Print Services

Note
4-6 ®
NetWare Settings (Windows)
®
Print Service
In order to print on a NetWare
queue, and other settings. You can use the software applications below to
perform the print service settings from the computer that you are using.
• NWADMIN or PCONSOLE (Novell software applications provided with
®
NetWare )
z If you perform the print service settings with NWADMIN, Novell Client (the
®
Novell NetWare client) must be installed as the client software application.
z The following procedure describes the print service settings for NetWare
procedure may be slightly different for your network environment.
Before performing the print service settings, be sure to read the description
below then select the printer service type.
z You can also NDPS as the print service for NetWare
service, for the gateway use the Novell printer gateway provided by Novell. The
setup procedure for NDPS is not described in this manual, so please refer to your
®
NetWare instructions for details.
z NDS (Novell Directory Service) and Bindery
Both NDS and Bindery are compatible. You can select either, depending
on the requirements of your network environment.
z Queue server mode and remote printer mode
The queue server mode and the remote printer mode are both compatible.
• Queue server mode
When the queue server mode is used, the hardware and software for other
print servers is not required because queue server mode contains all the
print server functions. In NDS queue server mode (NDS PServer), the
NDS print server is used to print. In the bindery queue server mode
(Bindery PServer), the bindery print server is used to print. In the queue
server mode, one NetWare
interface used in the network.
®
network, you must set the printer server,
®
. If you use NDPS as the print
®
license is required for every network
®
. The