Canon imagePROGRAF W8400 User Manual page 281

Moving the Printer
14
Close the top cover.
15
Remove the accessory pocket.
16
Tape each printer cover in the reverse order
of tape removal during setup.
17
To remove the output stacker, apply the
attachment procedure in reverse.
18
Apply the printer mounting procedure in
reverse to unmount the printer.
19
Apply the stand assembly procedure in
reverse to disassemble and pack the stand.
4- 36
20
Reattach the tapes and shipping materials to
the roll holder and printer, then pack them in
the original shipping box.
This completes the preparation for moving the printer.
Important
To reassemble the printer after moving, perform
installation according to the "Quick Start Guide".
Executing the Move Printer menu and removing the
power supply cable before turning the printer off to
move the printer may cause damage to the printer.
Perform the procedures for attaching the power supply
cable and ink tanks starting from
Start Guide)
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Step 1. (→ Quick
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
TOP
Contents
Index