Canon imagePROGRAF W8400 User Manual page 334

NetWare Settings (Windows)
Setting Up the Print Server With
NWADMIN, PCONSOLE
If You Are Using NDS Queue Server Mode or
Remote Printer Mode
1
Log into NetWare as the System
Administrator, or as a user with equivalent
access rights, then start NWADMIN.
2
Execute the Quick Setup.
Select Print Services Quick Setup from the
Tools menu.
For the Print Server Name, enter the desired
name. If you are using an existing name, press
the button on the right and select from the list.
Enter the desired name in printer Name.
If you are using queue server mode, select
Other/Unknown in Type. If you are using
remote printer mode, Select Parallel in Type,
press the Communications... button, and
then set the Ports to LPT1, and set Manual
Load to Connection Type.
For the print queue Name enter the desired
name.
Enter the volume object (i.e., the object that
represents the physical volume on the
network) in which to create the queue in
Volume. Press the button on the right to select
from a list.
5- 38
Perform any other settings as required, and
then click the OK button.
Note
The name of the print server is required when
configuring the printer protocol settings so be sure to
note down the printer name.
If you are performing a quick setup, the printer is
allocated printer number 0. If you are using queue
server mode, do not change the printer number from 0.
3
Set the password.
Select the print server created in
right-click Details.
Click the Change Password button to open
the password entry screen, then enter the
desired password.
Click the OK button to close the password
entry screen.
Click the OK or Cancel button to close the
Details screen.
4
Follow the procedure below to start the print
server if you are using Remote Printer Mode.
To use the NetWare file server as the print
server, enter "LOAD PSERVER.NLM" on the
file server then press the Enter key.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Step 2, then
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index