Canon imagePROGRAF W8400 User Manual page 277

Replacing the Cutter Blade
9
Close the top cover.
Please Wait.. appears in the bottom line of the
display. After the carriage has moved, the Reset Cut
Count message is displayed.
10
Press the OK button.
Reset Cut Count
Press OK/Stop
The printer returns to online mode.
Note
Refer to the "Round Blade Cutter Unit Setup Guide"
binding to the Round Blade Cutter Unit for the
installation.
Refer to the "Media Type"
paper type with the Round Blade Cutter Unit.
4- 32
(→ P.2-4) for the available
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index