Canon imagePROGRAF W8400 User Manual page 113

Using the Media Take-up Unit
15
Align to the roll media width, and then
assemble the weight roll (a, b, c, d) and the
weight joint (e).
Assemble the weight rolls as described below.
Colored labels are affixed to the weight rolls.
Compatible Roll
Media Sizes
(24"/610 mm)
(36"/914 mm)
(42"/1,067 mm)
(44"/1,118 mm)
Note
The weight roll top surface (b, c, d) can be used only
for assembly.
2- 52
a
e b,c,d
a
Weight Rolls that
Can Be Used
Black (a)
Black (a) + Blue (b)
Black (a) + Red (c)
Black (a) + Yellow (d)
16
Gently place the weight roll on the slack in
the roll media.
Important
Make sure to place the weight roll as described.
Failure to do so may cause defective spooling.
When mounting the weight roll, take care that you do
not touch the tube and knock the left-right position of
the roll media out of alignment.
17
Press the Online button to display Online on
the printer display.
Information Power
Data
Online
Bk
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index