Canon imagePROGRAF W8400 User Manual page 359

Message Is Displayed
Check Bk/PC/C/PM/M/Y Ink Tank
Cause 1: The ink tank indicated by the color on the
display cannot be used with this printer, or an
empty tank was installed.
Solution 1: Install correctly the ink tank of the color named
in the message. (→ P.4-2)
Important
The ink may mix if you install an incorrect ink tank. If
the color is incorrect as a result of installing the wrong
ink tank, or if the images are very poor quality, and the
Bk tank was mistakenly installed, perform the
ChangeBkInkType operation (→ P.4-48). If you
mistakenly installed any other ink cartridge, perform
the Move Printer operation, and then install new ink
tanks. (→ P.4-33)
Cause 2: A problem has occurred with the ink tank
indicated on the display.
Solution 1: Replace with a new ink tank. (→ P.4-2)
6- 12
Not Enough Ink
Cause 1: You cannot execute Head Cleaning B, print, or
use any other function that uses ink because
the remaining ink level is low.
Solution 1: Replace the ink tank where the ink level is low.
(→ P.4-2)
Ink level ?
Cause 1: The ink level detection function is turned OFF.
Solution 1: Every time printing is performed, this message
is displayed and the printer goes offline. Press
the Online button to continue printing.
Solution 2: To retrieve the ink level display, replace with the
ink tanks specified for use with this printer.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index