Canon imagePROGRAF W8400 User Manual page 115

Using the Media Take-up Unit
3
Set the spool mode switch on the media
take-up unit to Manual.
4
Remove the weight roll from the roll media.
5
Press the Online button to display MAIN
MENU on the printer display.
MAIN MENU
Head Cleaning
2- 54
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
6
Press [ ] or [ ] to select Force Cutting,
then press [ ].
MAIN MENU
↓
Force Cutting
7
Select Yes using the [
while holding the trailing edge of the printed
paper, and then press the OK button.
Force Cutting
Yes
The roll media will be cut.
Important
If you are cutting roll media, make sure to hold the
trailing edge of the printed paper. If cutting is
performed without holding the paper, the paper may
fall to the floor and the printed surface become dirty.
] and [ ] buttons
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index