Cleaning The Printer; Cleaning The Exterior Covers - Canon imagePROGRAF W8400 User Manual

Cleaning the Printer

Cleaning the Printer
Clean the printer periodically to maintain high print quality
and to avoid problems.
Always follow the safety guidelines below when cleaning
the printer.
Caution
When you clean the printer, always turn the printer off
and unplug the power cord from the power supply. If
the printer is accidentally switched on while you are
cleaning it, moving parts inside the printer may come
into contact with you and cause personal injuries.
Never use flammable liquids such as thinners,
benzene, alcohol, etc. to clean the printer. If these
liquids come into contact with electrical components
inside the printer, this could cause a fire or electrical
shock.
When cleaning the printer, never touch the power
supply cable with wet hands. Doing so may cause
electric shock.
4- 10

Cleaning the Exterior Covers

During normal use the printer surfaces require cleaning at
least once a month.
1
Press and hold down the Power button until
you see Shut Down.. in the printer operation
panel display then release the button.
Information Power
Data
Shut Down..
Please Wait..
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
2
Disconnect the power cord from the outlet.
The shape of the power cable varies from
country to country.
Caution
Check that the printer power supply has been turned
OFF, and then disconnect the power supply cable. Failure
to do so may cause personal injury.
Offline
Menu
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index