Software Applications Used To Configure Network Settings - Canon imagePROGRAF W8400 User Manual

Software Applications Used to Configure Network Settings

Software Applications Used to Configure Network Settings
Use the following listed software to perform the network settings.
Type of Setting
Setting the Printer IP Address
(→ P.5-7)
Configuring the TCP/IP Protocol
Settings (→ P.5-15)
Configuring the AppleTalk Protocol
(→ P.5-25)
Setting Up NetWare Print Service
(→ P.5-37)
Setting NetWare Protocol
(→ P.5-40)
*1. Only the following can be set: 1 IP address, subnet mask, default gateway, DHCP, BOOTP, and RARP.
*2. Only the following can be set: phase.
*3. Only the following can be set: frame type.
5- 51
GARO Device Web Browser
Setup Utility (Remote UI)
*1
*2
*3
ARP/PING Printer
command Operation Panel
*1
*2
*3
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index