Canon imagePROGRAF W8400 User Manual page 196

Printing from a Macintosh
Borderless Printing
This section describes the borderless printing procedure.
<To do borderless printing on media the same size as the original>
1
Create the original in the software application so it matches the size of the media used for printing.
Important
The following page sizes can be set for borderless printing. When creating a document, refer to the following table and
create a document with a size for which borderless printing can be performed.
If the media size was pre-selected in the software application, the selected size must support "Borderless Printing".
Borderless printing on media the
same size as the original
document
Borderless printing with
enlargement and reduction
Note
Make sure the image created for borderless printing covers the entire original page.
2
From the File menu of the software application select Print to display the Print dialog box.
3- 79
ISO A0, ISO A1, ISO A2, JIS B0, JIS B1, JIS B2, JIS B3, ANSI Legal,
ARCH E1, ARCH E, ARCH D, ARCH C, 20
8 x10 , US Photo (16 x20 ), Banner (42
" " " "
All page sizes
x24 , 14 x17 , 10 x12 , 10
" " " " " "
x60
" ")
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
x15 ,
" "
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index