Canon imagePROGRAF W8400 User Manual page 310

TCP/IP Network Settings (Windows, Macintosh, UNIX)
13
Press the [ ] button once, and then press
the [ ] or [ ] button to select Default G/W,
and then press the [
IP Setting
Default G/W
14
Press [ ] or [
default gateway to change, then press OK
button.
Default G/W
=0.0.0.0
15
Press [ ] or [
the IP address of the default gateway, then
press OK button.
Each time you press the [
increases by 1. The next number after 255 is 0.
Each time you press the [
decreases by 1. The next number after 0 is 255.
Default G/W
=XXX.0.0.0
16
Repeat Step 14
address of the default gateway.
Finally, you need to save the IP address, subnet
mask, and default gateway settings.
17
Press the Online button.
Default G/W
=XXX.XXX.XXX.XXX
5- 14
] button.
↓
] to select the number within
] to change the number to
] button the number
] button the number
and 15 to enter the IP
Store Setting is displayed.
18
Press the OK button.
If you want to abort the settings, press Stop/Eject
button.
Store Setting
Ok?
The message Storing appears on the display and
then the printer is restarted.
When finished, the printer returns Online.
If an error message is displayed, review the values
of each of the settings, and correct the settings.
Important
If you change the IP address, subnet mask, or default
gateway, make sure you save the settings using
18. If the settings are not saved, the entered values
will not be enabled.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
Step
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index