Canon imagePROGRAF W8400 User Manual page 388

Removing Media Jams
5
If the paper is not visible, open the ejection
guide and remove the roll holder. Next,
remove the jammed paper from the bottom.
Inspect the interior to make sure there are no paper
scraps remaining, and then close the ejection guide.
6
If the carriage is at the left edge, move the
carriage to the right edge by hand.
Push the carriage to the right until it stops.
Important
Make sure you push the carriage to the right. If you
push it to the left, the printer will display a carriage
error when the printer is switched on.
6- 41
7
If the printer is OFF, press the Power button
to turn ON the printer.
Information Power
Data
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
8
With the print side of the new sheet facing
up, holding the sheet square between the
paperweight, making sure that the stack is
aligned with the line (a) on the right and
aligned with the line (b) at the back.
Offline
Menu
b
a
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index