Canon imagePROGRAF W8400 User Manual page 305

TCP/IP Network Settings (Windows, Macintosh, UNIX)
3
Enter the IP Address, Subnet Mask, and
Gateway Address assigned to the printer and
click the Set button.
To configure the IP address automatically, select
Auto from Setting IP Address, and then place a
checkmark next to method to use (choose between
DHCP, BOOTP, or RARP). To configure a static IP
address, select Manual from Setting IP Adress.
AppleTalk and NetWare are disabled under the
factory default printer settings. To use AppleTalk for
printing, set the AppleTalk Phase to Phase 2.
To use NetWare for printing, set NetWare Frame
Type to the frame type you are using.
5- 9
4
Click the OK button when the confirmation
message is displayed.
5
When you have finished configuring the
settings, select Exit from the Printer menu.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index