Canon imagePROGRAF W8400 User Manual page 337

NetWare Settings (Windows)
3
Select Network from the Device Manager
menu on the left.
The Network page appears.
4
Click the Edit button to the right of NetWare.
The Edit NetWare Protocol Settings page
appears.
5- 41
5
Check the Frame Type box and make sure
the setting is correct for your NetWare
network.
6
If you intend to use burst mode, set NCP
Burst Mode to On.
Note
Burst mode is used in queue server mode to transfer
data rapidly at very high speed during printing.
Normally, leave this setting on.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index