Replacing The Cutter Blade - Canon imagePROGRAF W8400 User Manual

Replacing the Cutter Blade

Replacing the Cutter Blade
Follow the procedure below to replace the cutter blade
when it no longer cuts cleanly.
Replacing Standard Cutter Blades (Flat Cutters)
( P.4-27)
→
Replacing Optional Cutter Blades (Round
Cutters) ( → P.4-30)
Replacing Standard Cutter Blades
(Flat Cutters)
Change the cutting position of a blade when the blade no
longer cuts cleanly. The cutting position can be changed
twice for each blade. Once the cutting position adjustment
dial is set to 3, replace the blade with a new one.
Cutter Blade CT-02
4- 27
1
If the printer power is off, press the Power
button to switch the printer on.
Information Power
Data
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
After a few moments, Online appears in the display.
2
Press the Online button to display MAIN
MENU.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
3
Press [ ] or [ ] to display System Setup
then press [ ].
MAIN MENU
↓
System Setup
4
Press [ ] or [ ] to select Change Cutter,
then press [ ].
System Setup
↓
Change Cutter
Offline
Menu
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index