Setting Netware Protocol - Canon imagePROGRAF W8400 User Manual

Canon imageprograf w8400: users guide
Hide thumbs Also See for imagePROGRAF W8400:
Table of Contents

Advertisement

NetWare Settings (Windows)

Setting NetWare Protocol

The printer protocol settings can be configured from a
computer using a web browser (Remote UI). First set the
printer IP address. (→ P.5-7)
Configuring the Protocol Using a Web
Browser (Remote UI)
Important
You can use Netscape Navigator/Communicator 6.0 or later,
or Internet Explorer 5.01 or later for the web browser.
You cannot connect to the printer via a proxy server. In
an environment that uses a proxy server, add the
printer IP address to Exceptions (addresses that do
not use a proxy) in the web browser proxy server
settings. (These settings vary depending on the
network environment.)
Enable the JavaScript and Cookies settings in the web
browser.
If multiple remote UIs are run at the same time, the last
setting to be made will be used. It is recommended
that you only run one remote UI at a time.
Note
When the Remote UI is started using the printer name,
make sure that the DNS settings for the DNS
environment and board have been set up correctly.
If Remote UI is started and the print history is
displayed as RPrinter/NPrinter, the document name
and user information cannot be obtained.
Consequently, the document name will only be
displayed as "unknown", and the user will only be
displayed as "RPRINTER/NPRINTER".
5- 40
1
Start the Web Browser and enter the
following URL in the Location or Address
box, then press the Enter key.
http:// <Printer IP Address or name> /
Sample: http://XXX.XXX.XXX.XXX/
2
Select Administrator Mode and then click
the Logon button.
Remote UI starts.
Note
If a password has been setup on the printer, enter the
password and then press the Logon button. If a
password has not been setup, you do not need to
enter a password.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf w8400d

Table of Contents