Canon imagePROGRAF W8400 User Manual page 251

Replacing Ink Tanks
3
Press the ink tank lever of the color to
replace, then open the ink tank cover.
4
Hold the empty ink tank by the grips on the left
and right side of the ink tank, then remove it.
Place the ink tank that you removed in a plastic bag
and seal it.
Important
If there is ink remaining in the removed ink tank, store
the ink tank with the ink supply port (a) pointing up. If
you store the tank with the ink supply port (a) facing
down, ink may leak out.
4- 6
a
5
Gently shake the new ink tank 7 or 8 times
while it is still in the package, then remove it
from the package.
Important
Always confirm that the replacement black ink tank is
the same type as the tank that is installed in the printer.
If you mix up the photo black ink tank and matte black
ink tank, print quality will be reduced. To change the
type of ink tank, execute ChangeBkInkType on the
printer operation panel before replacing the ink tank.
(→ P.4-48)
Always hold an ink tank by its left and right grips (b)
while you are handling it.
Never touch the ink supply port (a) or the electrical
contacts (c). This could damage the ink tank, cause
poor print quality, or stain the work area.
a
b
c
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index