Canon imagePROGRAF W8400 User Manual page 263

Replacing the Maintenance Cartridge
6
Place the new maintenance cartridge into the
maintenance cartridge cover and make sure
that it is inserted completely.
Important
Never touch the electrical contacts (b). Touching the
electrical contacts on the back of the maintenance
cartridge may damage the cartridge.
7
Close the maintenance cartridge cover.
4- 18
8
Important
b
Press the Information button.
The initialization of the new maintenance cartridge
finishes after about 5 seconds, and then the printer
enters the Online mode.
Do not attempt to remove the maintenance cartridge
within 5 seconds after the printer enters online mode.
Touching the electrical contacts on the back of the
maintenance cartridge may damage the cartridge.
Note
The maintenance cartridge can also be replaced when
the printer is switched off. In this case, do not attempt
to remove the maintenance cartridge for at least 5
seconds after you switch the printer on again.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index