Setting The Printer Frame Type - Canon imagePROGRAF W8400 User Manual

NetWare Settings (Windows)

Setting the Printer Frame Type

The printer frame type must be setup so that the computer
you are using and the printer can communicate before you
can setup the printer protocol. Configure the settings using
the following software.
GARO Device Setup Utility (
Printer Operation Panel (
Important
To use the GARO Device Setup Utility, the GARO
Device Setup Utility needs to be installed on the
computer you are using. Install the GARO Device
Setup Utility for the administrator on the computer you
are using. (→ P.5-34)
Before setting the printer frame type, confirm that the
printer is switched on and connected to the network.
5- 34
P.5-34)
→
→ P.5-35)
Setting the frame type with GARO Device
Setup Utility
If you are using a Windows computer, use the "GARO
Device Setup Utility" (the software utility provided with
the printer) to configure the printer network settings.
1
Select Programs / GARO Device Setup
Utility / GARO Device Setup Utility from
the Start menu.
2
Select from the name of the printer you want
to setup from the list, then select Protocol
Settings from the Printer menu.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index