Canon imagePROGRAF W8400 User Manual page 276

Replacing the Cutter Blade
6
Open the top cover.
Important
Do not touch any areas other than as directed. Your
hands could get dirty or this could damage the printer.
If the cutter unit is dirty, wring out a damp, clean cloth
and use it to clean the cutter unit before replacing the
cutter blade.
7
Rotate the cutter blade knob (a) to the left,
and remove the cutter blade from the cutter
unit.
4- 31
Important
After removing the cutter blade, never touch the
cutting edge (b). This could cause personal injury.
8
Insert the new cutter blade such that the [ ]
symbol on the new cutter blade is aligned
with the
rotate it to the right to lock.
Note
Dispose of the used cutter blade according to local
laws.
a
b
symbol on the cutter unit, and
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index