Using Watermarks - Canon imagePROGRAF W8400 User Manual

Printing from Windows

Using Watermarks

Add a mark (Watermarks) to documents that are to be
handled particularly for printing. A range of stamps
(Confidential, copying prohibited, etc.) have been prepared
as standard.
Important
This function is not supported with Windows NT 4.0.
The Watermark function cannot be used if the print job
is set up with a poster page layout.
1
Open the printer driver dialog box from the
Print dialog box of the application.
Note
For more details about how to open the printer driver
dialog box, please refer to
"Basic Use". (→ P.1-38)
3- 29
"Printing" in Chapter 1
2
Select the Layout sheet.
3
Select Watermark.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index