Canon imagePROGRAF W8400 User Manual page 114

Using the Media Take-up Unit
18
Set the spool mode switch on the media
take-up unit to Auto.
This completes the media take-up unit preparations.
Perform printing from the computer.
2- 53
Removing Media that Has Finished
Printing
When printing has finished, use the following procedure to
remove paper from the media take-up unit.
1
Press the Online button to display Offline on
the printer display.
Information Power
Data
Offline
Feed Paper
Message
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
2
Press the [ ] button to feed the roll media
slightly.
To protect the spooled paper, feed out paper longer
than the external circumference of the roll.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index