Canon imagePROGRAF W8400 User Manual page 280

Moving the Printer
10
Open the top cover, and then open the
ejection guide.
Important
Do not touch any areas other than as indicated. Doing
so may damage the printer.
11
Rewind the roll media back onto the roll and
remove the roll holder and the four spool
prevention stays, and then remove the
ejection guide.
4- 35
12
Lower the holder stopper lever, remove the
stopper, remove the roll from the roll holder,
then store the roll holder and the holder
stopper.
a
13
Clamp the belt with the belt stopper then use
the hex screws to fasten the belt stopper.
Note
Attach the belt stopper that you removed and stored
during the initial installation.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index