Canon imagePROGRAF W8400 User Manual page 42

Printing
On the Main and Page Setup sheets, select the
Media Type, Print Quality, Color Settings, and
Scaling settings for the print job.
The print job starts.
Important
As soon as each sheet prints, remove it from the
output stacker.
Note
If the printer estimates that there is not enough ink
available to do a very long print or print several copies
of the same document, it will issue the Not Enough
Ink alert. If you see this message, replace the ink tank
that is low on ink. If you reinstall an ink tank that is
nearly out of ink, this may also cause the print quality
to deteriorate. Do not re-install an ink tank if the
mark is displayed in the ink supply level display.
1- 39
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index