Canon imagePROGRAF W8400 User Manual page 312

TCP/IP Network Settings (Windows, Macintosh, UNIX)
2
Select Administrator Mode and then click
the Logon button.
Remote UI starts.
Note
If a password has been setup on the printer, enter the
password and then press the Logon button. If a
password has not been setup, you do not need to
enter a password.
5- 16
3
Select Network from the Device Manager
menu on the left.
The Network page appears.
4
Click the Edit button to the right of TCP/IP
protocol.
The Edit TCP/IP Protocol Settings page opens.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index