Canon imagePROGRAF W8400 User Manual page 23

Function Menus
Menu Item
Med. Detail Set.
(Media Type)
Drying Time
Scan Wait Time
NearEnd RllMrgn
1- 20
Setting Values
Plain Paper*, CAD Plain Paper, Plain
Paper HQ, Recycled Coated, Coated
Paper, HW Coated, Premium Matte, Ex
HW Coated, Glossy Photo, Semi-Gl
Photo, HW Glossy Photo, HW SemiGl
Photo, Syn. Paper, Adh. Syn. Paper,
Backlit Film, Flame-Res.Cloth, Fabric
Banner, Proofing paper, News Proof 1,
News Proof 2, News Proof 3, FineArt
Photo, FneArt HW Photo, FineArt Txtr,
Canvas Matte, Canvas Semi-Gl, JPN
Paper Washi, Colored Coated, CAD
Trace Paper, CAD Matte Film, CAD
Clear Film, Special 1-5
Off, 30 sec., 1 min., 3 min., 5 min. 10
min., 30 min., 60 min.
Off, 1 sec., 3 sec., 5 sec., 7 sec., 9 sec. The amount of time that printhead pauses after
20 mm, 5 mm
Function
These are the names of media that you can
select. Only the names of the types of media
that can be used with the currently installed ink
tank are displayed.
The default ink drying time between printed
sheets can be set to match the current media.
each printing pass (scan) to wait for the ink to
dry can be set to match the absorption
properties of the current media. However, using
this setting will increase the printing time.
Sets the margin to reserve at the leading edge
of roll media to ensure printing quality is
maintained at the leading edge.
Important
If set to 5 mm, the print quality at the leading
edge, or the accuracy of feeding, may
deteriorate, or the surface of the print may be
scratched. Ink may also adhere to the leading
edge of the media.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index