List Of Network Settings; General Settings - Canon imagePROGRAF W8400 User Manual

List of Network Settings

List of Network Settings
If you are using a web browser (Remote UI), you can
change the network interface settings. The settings that can
be changed are described below.

General Settings

Item
Device Name
Device Name
(Range: 0 to 32 chars.)
Device location
Location
(Range: 0 to 32 chars.)
Name of Administrator for
Administrator the device
(Range: 0 to 32 chars.)
Telephone number of the
Phone Administrator
(Range: 0 to 32 chars.)
Comment Administrator Comments
(E-mail) (Range: 0 to 32 chars.)
Administrator Device password
Password (Range: 0 to 15 chars.)
5- 48
Content Initial Value
Blank
Blank
Blank
Blank
Blank
Blank
TCP/IP Settings
Item Content
Determines whether DHCP
Set the Address
is used to configure the IP
Using DHCP
address
Determines whether
Set the Address
BOOTP is used to configure
Using BOOTP
the IP address
Determines whether RARP
Set the Address
is used to configure the IP
Using RARP
address
RAW Mode Bi-
Determines whether bi-
directional
directional communication
Communication
is used for RAW mode.
Function
Performs Determines Whether DNS
Dynamic Update Server Registration Update
of DNS is Automatic.
Using the
Determines whether
Zeroconf
Zeroconf is used.
Function
IP Address The IP address of the printer
Subnet Mask The subnet mask of the printer
Gateway The gateway address of the
Address printer.
Primary DNS IP address of the primary
Server Address DNS server
Secondary DNS IP address of the secondary
Server Address DNS server.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Initial Value
Using Various Media
Off
Chapter 3
Printing by Objective
Off
Chapter 4
Off
Maintenance
Chapter 5
Off
Using the Printer
in a Network
Environment
Chapter 6
Off
Troubleshooting
On
Chapter 7
Operating the
0.0.0.0
Function Menu
0.0.0.0
0.0.0.0
Contents
0.0.0.0
0.0.0.0
Index