Confirming The Print Condition - Canon imagePROGRAF W8400 User Manual

Confirming the Print Condition

Confirming the Print Condition
When you see that the printouts are faded and uneven, or
streaked with white lines, print a Nozzle Check to determine
whether the nozzles are blocked. Before you print a Nozzle
Check, make sure roll media or cut sheets of A3 size or
wider are loaded in the printer.
Note
If you are using cut sheets, make sure at least one
sheet of unused A3 paper (not the blank side of used
paper) or larger are loaded in the printer.
1
If the printer power is off, press the Power
button to turn the printer on.
Data
Message
Within a short time, Online or Offline is displayed.
4- 37
Information Power
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
2
Press the Online button to display MAIN
MENU.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
3
Press [ ] or [ ] to select Test Print then
press [ ].
MAIN MENU
↓
Test Print
4
Press [ ] or [ ] to select Nozzle Check,
then press OK button.
Test Print
↓
Nozzle Check
The nozzle check pattern prints. The printer returns
to the online mode and displays Online in the
display as soon as printing completes.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index