Canon imagePROGRAF W8400 User Manual page 318

Macintosh Network Settings
2
Confirm that Ethernet is selected for the
AppleTalk connection.
Start AppleTalk on Control Panels.
Select Ethernet.
Close AppleTalk to save the setting.
This completes the AppleTalk network settings for a
Macintosh.
Important
Select Printer Port if the computer is connected to
Ethernet via LocalTalk.
5- 22
For Mac OS X
Confirm the AppleTalk settings under Network in
System Preferences.
1
Open Network under System Preferences.
2
Set the Show setting to Built-in Ethernet
3
Select the AppleTalk sheet and confirm that
Make AppleTalk Active is selected.
If this item is not checked, select it and then click the
Apply Now button.
4
Close Network to save the settings.
This completes the AppleTalk network settings for a
Macintosh.
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index