Canon imagePROGRAF W8400 User Manual page 381

Unexpected Printing Results
The overall print result is tinged red or blue
Cause 1: Unsuitable color balance.
Solution 1: Use the procedure described below to return
the Adjust Printer and Color Adj. to the
factory set values (2).
1. Press the Online button to display MAIN
MENU.
2. Press [
and then press the [
3. Press [
then press the [
4. Press [
and then press the [
5. Press the [
and then press the OK button.
Solution 2: If the color balance is not restored despite
performing the procedure described above,
restore the set values for each color using
Color Adj. in the Adjust Printer menu.
1. Press the Online button to display MAIN
MENU.
2. Press [
and then press the [
3. Press [
then press the [
4. Press [
be adjusted, and then press the [
6- 34
] or [ ] to select Adjust Printer,
] button.
] or [ ] to select Color Adj., and
] button.
] or [ ] to select Return Defaults,
] button.
] or[ ] button to select Yes,
] or [ ] to select Adjust Printer,
] button.
] or [ ] to select Color Adj., and
] button.
] or [ ] to select the ink color to
] button.
5. If the color selected using the [
buttons is too thin, select "1", and if the ink is
too thick, select "3", and then press the OK
button.
6. Repeat Step 4 and 5
adjusted.
Note
If thick colors need to be adjusted, adjust the Y, M, C,
and K inks.
If thin colors need to be adjusted, adjust the PM and
PC inks.
] and [ ]
for each color to be
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index