Aligning The Printhead - Canon imagePROGRAF W8400 User Manual

Change the height of the printhead

Aligning the Printhead

After the printhead height has been adjusted, on the printer
operation panel adjust the print mode by selecting Auto
Head Adj., and then Standard Adj..
Printhead" (→ P.4-41)
Changing Printhead Height Again
After a print job is finished and you want to perform the next
job on a different type of media, repeat the procedure to
adjust the height of the printhead
Height" (→ P.2-43), and then reset the printhead height
adjustment lever to the optimum position for the media
type.
Further, if the printhead height was changed, readjust the
printhead using the operation panel.
"Aligning the Printhead"
2- 45
("Aligning the
"Changing Printhead
(→ P.4-41)
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index