Pap Authentication; Chap Authentication - 3Com MSR 50 Series Configuration Manual

Configuration procedure

1 PAP authentication:

a Configure Router A as PPPoE server
# Add a PPPoE user.
<RouterA> system-view
[RouterA] local-user user2
[RouterA-luser-user2] password simple hello
[RouterA-luser-user2] service-type ppp
[RouterA-luser-user2] quit
# Configure the parameters of the virtual template.
[RouterA] interface virtual-template 1
[RouterA-Virtual-Template1] ppp authentication-mode pap
[RouterA-Virtual-Template1] ip address 1.1.1.1 255.0.0.0
[RouterA-Virtual-Template1] remote address 1.1.1.2
[RouterA-Virtual-Template1] quit
# Configure PPPoE server.
[RouterA] interface ethernet 1/0
[RouterA-Ethernet1/0] pppoe-server bind virtual-template 1
b Configure Router B as PPPoE client
<RouterB> system-view
[RouterB] dialer-rule 1 ip permit
[RouterB] interface dialer 1
[RouterB-Dialer1] dialer user user2
[RouterB-Dialer1] dialer-group 1
[RouterB-Dialer1] dialer bundle 1
[RouterB-Dialer1] ip address ppp-negotiate
[RouterB-Dialer1] ppp pap local-user user2 password simple hello
[RouterB-Dialer1] quit
# Configure PPPoE session.
[RouterB] interface ethernet 1/0
[RouterB-Ethernet1/0] pppoe-client dial-bundle-number 1

2 CHAP authentication:

a Configure Router A as PPPoE server
# Add a PPPoE user.
<RouterA> system-view
[RouterA] local-user user2
[RouterA-luser-user2] password simple hello
[RouterA-luser-user2] service-type ppp
[RouterA-luser-user2] quit
# Configure the parameters of the virtual template.
[RouterA] interface virtual-template 1
[RouterA-Virtual-Template1] ppp authentication-mode chap
[RouterA-Virtual-Template1] ppp chap user user1
PPPoE Configuration Example 399