Ending A Session - Paradyne 9161 User Manual

Ending a Session

9161-A2-GB20-00
If . . .
You are attempting direct
access through the COM
port and the user interface
is currently in session via
an in-band Telnet session
The T1 access unit has
the Communication Port
and Login Required
configuration options
enabled and there is no
contention for the user
interface
Use the Exit function key from any screen to terminate the session.
Procedure
To end a session:
1. Press Ctrl-a to go to the screen function key area.
2. Select Exit and press Return. Either the Idle screen or the Main Menu
appears, depending on access level. The terminal is disconnected.
3. If ending a configuration editing session, the Save Configuration screen
appears with the Save Changes? prompt.
If you select . . .
No
Yes
November 1996
Then . . .
The message User
Interface Already In Use
appears with the active
user's IP address.
The Login screen
appears.
Then . . .
You are returned to the Main Menu and disconnected.
The Save Configuration To screen appears. Select a
configuration option area to save your changes to
(Current, Customer 1, or Customer 2).
Start-Up
What to do now?
See System Status
Messages in Chapter 5.
Enter your ID and
password. If Invalid
Password appears, see
System Error Messages
in
Chapter 5.
3-3